DOWNLOAD M-HORSE 606W STOCK ROM/FIRMWARE

 

M-Horse 606W Details 

This phone comes with a 4-inch touchscreen display with a resolution of 400 X 840 pixels with ~196ppi. A size of 133 x 65.1 x 9.8 mm and weighs about 190g. 

Powered by 1.0GHz dual-core Spreadtrum SC6820 Processor and 256MB of RAM there’s also 4GB ROM which can be expanded up to 32GB with microSD.  

There is a 2-megapixel primary camera with LED Flash and a 0.3-megapixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth, Micro USB 2.0 also supports only 2G and 3G. Sensors on this phone include Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope.  

Powered by a 2000Mah removable battery 

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility for whatever may happen to your device. 

Flash at your own risk! 

Make sure you are downloading the exact ROM of the device you want to flash because flashing  

a wrong firmware can render the device useless  

(can't power on, can't charge and will not be detected by a computer). 

DOWNLOAD M-HORSE 606W STOCK ROM 

F8_JHM_606W_5991G_APK_NG_V08_20161020_DOUBLECARD 

DOWNLOAD ROM 

 *************************************************** 

JHM_606W_APK_20160314_V06_DOUBLECARD 

DOWNLOAD ROM 

JHM_606W_APK_NG_V05_20160810_DOUBLECARD 

 DOWNLOAD ROM 

JHM_606W_APK_NG_V00_DOUBLECARD 

 DOWNLOAD ROM 

 How to flash this device using Research Download or UpgradeDownload Tool stage 1. Download and install SPD drivers. 

Stage 2. Download the latest version of Research Download or UpgradeDownload. 

Stage 3. Extract and Launch Research Download/UpgradeDownload Tool. 

Stage 4. Click on load icon. 

Stage 5. Navigate to the folder containing the firmware. 

Stage 6. Select the pac file in the firmware folder. 

Stage 7. Wait for it to load in Research Download/UpgradeDownload tool. 

Stage 8. Click Play/Start button. 

Stage 9. Now connect the device to PC while holding volume down key 

(Some new devices required holding volume up key). 

Stage 10. Wait for the flashing process to complete. 

Stage 11. When you see Passed! Then note that the flashing or upgrading process is complete. Stage 10. Reboot device. 

For a more details tutorial 

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages... 

You can also use tools like 

Miracle Box 

infinity CMII  

Volcano 

GPG Dragon etc.