How to Flash or Upgrade Spreadtrum devices with PAC or BIN file using GPG Dragon

This tutorial will be showing you how to flash spreadtrum devices using gpg dragon. Research Download or Spd Upgrade Download is good for flashing or upgrading spreadtrum devices but for some reason like the flash file is in BIN format or you are just out to experiment you might want to flash your device using GPG Dragon. Well GPG Dragon has other features which you might be interested in trying. 

 Note  

Use this tutorial at your own risk! 

This tutorial is only for devices with 6820 & 8810 cpu 

If you will like to flash devices with new cpu and use many more functions with this tool, buy their box and get an updated version of the software. 

  

 

>Download and install spreadtrum drivers 

>Download and extract gpg dragon 

>Launch GPG Dragon 

>Click on Spreadtrum Tab 

>Tick WriteFlash 

>Under Mobile Option, Select 6280_Android or 8810_Android 

>Click the button with 3 dots [...] near C:\Temp_File.bin bar 

>Select the pac or bin file you want to flash 

>Click Start Button 

>You will see Scanning USB Port 

>Connect the spreadtrum device you want to flash to PC while holding volume down button 

>GPG Dragon will Read the phone info and the pac or bin file info then you will see a message Waiting for your confirmation... 

>Tick the partitions you want to flash and select OK (do not untick anything if you want to do full flash) 

>You will see a purple progress bar with percentage completed. 

>When flashing is complete, you will see a message All Done! 

>You can now disconnect the device and reboot.