DOWNLOAD iNEW L4 & iNEW L4A STOCK ROM / FIRMWARE

 

iNew L4 Quick Review 

iNew L4 runs on Android 5.1 Lollipop. This device is a 5.5-inch ips touchscreen display with a resolution of 1280 X 720 pixels. A size of 148 x 75 x 9.5 mm and weighs about 178g. 

Powered by 1.3GHz quad-core processor MediaTek MT6753M with Mali-T720 and 2GB of RAM. There’s also 16GB of internal storage which can be expanded up to GB with microSD.  

There is a 13MP primary camera with LED Flash and a 5-megapixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM+WCDMA+LTE FDD network mode. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope. 

This device is powered with a 5000Mah non-removable battery 

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility for whatever may happen to your device. 

Flash at your own risk!  

Make sure you are downloading the exact ROM of the device you want to flash because flashing  

a wrong firmware can render the device useless  

(can't power on, can't charge and will not be detected by a computer). 

iNew L4 1GB RAM VERSION STOCK ROMiNew_L4_V1.0.6_150724 

Download Rom 

 iNew L4 2GB RAM VERSION STOCK ROM iNew_L4_2_V1.0.3_150814 

Download Rom 

 DOWNLOAD iNEW L4A STOCK ROM 

iNew_L4A_2_V1.0.1_151027 

Download Rom  

How to flash this device using SP Flash Tool 

Stage 1. Download, MTK VCOM USB drivers. 

Stage 2. Download, latest SP Flash Tool. 

Stage 3. Launch Flashtool inside the extracted folder. 

Stage 4. Click on scatter loader button. 

Stage 5. Select the scatter file inside the stock rom folder of the device you want to flash. 

Stage 6. Select either Download only, Firmware Upgrade or Format + Download from drop-down menu. 

Stage 7. Click Download Button. 

Stage 8. Now turn off and connect your device to PC. 

Stage 9. Wait for the flashing process to complete. 

Stage 10. Reboot device. 

  

If there was no cache or userdata inside the ROM folder 

In this stage, you might need to factory reset device from recovery after flash 

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages.... 

You can also use other tools like  

WiseLink 

SP Multiport Download 

Miracle Box 

Volcano 

Infinity CMII etc. 

If you encounter any error while flashing your device, click here and see if it solves your problem.