DOWNLOAD ULEFONE AMOUR STOCK ROM / FIRMWARE

Ulefone Amour Details 

Ulefone Amour runs on Android 6.0 Marshmallow.
This device is a 5.0-inch ips touchscreen display with a resolution of 1280 X 720 pixels. A size of 148.9 x 75.8 x 12.5 mm and weighs about 195g 

Powered by 1.3GHz octa-core processor MediaTek MT6753 with 3GB of RAM. There’s also 32GB of internal storage which can be expanded up to 128GB with microSD.  

There is a 13MP primary camera with LED Flash and a 5-megapixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM+WCDMA+LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope. 

This device is powered with a 3500Mah non-removable battery  

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility for whatever may happen to your device. 

Flash at your own risk!  

Make sure you are downloading the exact ROM of the device you want to flash because flashing  

a wrong firmware can render the device useless  

(can't power on, can't charge and will not be detected by a computer). 

 DOWNLOAD ULEFONE AMOUR STOCK ROM 

 ulefone armor_V1.0.11_20170509(3.0) - Variant 1 

Download rom 

 Ulefone Armor_Android 6.0_20170518(4.0) - Variant 2 

Download Rom 

How to flash this device using SP Flash Tool 

Stage 1. Download, MTK VCOM USB drivers. 

Stage 2. Download, latest SP Flash Tool. 

Stage 3. Launch Flashtool inside the extracted folder. 

Stage 4. Click on scatter loader button. 

Stage 5. Select the scatter file inside the stock rom folder of the device you want to flash. 

Stage 6. Select either Download only, Firmware Upgrade or Format + Download from drop-down menu. 

Stage 7. Click Download Button. 

Stage 8. Now turn off and connect your device to PC. 

Stage 9. Wait for the flashing process to complete. 

Stage 10. Reboot device. 

If there was no cache or userdata inside the ROM folder 

In this stage, you might need to factory reset device from recovery after flash 

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages.... 

You can also use other tools like  

WiseLink 

SP Multiport Download 

Miracle Box 

Volcano 

Infinity CMII etc. 

If you encounter any error while flashing your device, click here and see if it solves your problem.