DOWNLOAD LENOVO K30-T STOCK ROM / FIRMWARE

Lenovo K30-T Quick Review

This phone comes with a 5.0-inch Super AMOLED touchscreen display with a resolution of 540 X 960 pixels with ~234ppi. A size of 137.4 x 67.4 x 9.7 mm and weighs about 156g.

Quad-Core 1.2GHz Qualcomm Snapdragon 410 MSM8916 with Andreno 306 GPU and 1GB of RAM there’s also 16GB ROM which can be expanded up to 128GB with microSD. 

There is a 8-megapixel primary camera with LED Flash and a 2-megapixel front selfie camera.

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth 4.0, Micro USB 2.0 also supports GSM, WCDMA, LTE network. Sensors on this phone include Fingerprint, Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope. 

Powered by a 2300Mah removable battery

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility for whatever may happen to your device. 

Make sure you are downloading the exact ROM of the device you want to flash because  

 flashing a wrong file, will make the device completely dead  

(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD LENOVO K30-T STOCK ROM

LENOVO_K30-T_S046_150410

DOWNLOAD ROM

LENOVO_K30-T_S040_150126

DOWNLOAD ROM

LENOVO_K30-T_20160222A

DOWNLOAD ROM

How to flash this device using Qualcomm Flash Image Loader (QFIL) 

Stage 1. Download and install the latest version of QPST from here 

Stage 2. Download and install Qualcomm usb drivers from here 

Stage 3. To launch QFIL, navigate to C:\Program Files\Qualcomm\QPST\bin) 

Stage 4. Now connect your infinix hot 3 X553 to PC while holding both vol up & down button 

Stage 5. Device will be detected and you will see  

Stage 6. Qualcomm HS-USB QDLoader 9008 (COM XX) 

Stage 7. Click Browse button under Select Build section 

Stage 8. Navigate and select the folder of the firmware 

Stage 9. Click on XML button from the pop up, select rawprogram xml file and then patch xml file 

Stage 10. Click Browse button under Select programmer section from dialogue box select the prog_emmc_firehose mbn file and click OK 

Stage 11. Click Download button and wait for flash process to complete 

For a more detail tutorial 

On how to flash this device with QFIL, click here 

You can also use tool like 

QcomDLoader to flash this phone.