DOWNLOAD TECNO N9S STOCK ROM / FIRMWARE

Tecno N9S Details 

Tecno  N9S runs on Android 6.0 Marshmallow This device is a 5-inch ips touchscreen display with a resolution of 720 X 1280 pixels, 267ppi. A size of 140.7 x 72.5 x 9.5 mm and weighs about 182g. 

Powered by 1.3GHz quadcore MediaTek MT6580 processor  with Mali-T720MP2 and 1GB of RAM. There’s also 16GB of internal storage which can be expanded up to 64GB with microSD.  

There is a 8MP primary camera with LED Flash and a 2-megapixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM, WCDMA & 4G LTE networks. Sensors on this phone include scanner, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope. 

This device is powered with a 2500Mah non-removable battery  

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility on whatever may happen to your device. 

Flash at your own risk. 

Make sure you are downloading the exact ROM of the device you want to flash because  

 flashing a wrong preloader, will make the device completely dead  

(can't power on, can't charge and will not be detected by a computer) 

 DOWNLOAD TECNO N9S STOCK ROM 

FOR KENYA SAFARI NETWORK N9S-WQ500TB1-M-KESF-161215V5 

DOWNLOAD ROM ------------------------------------------------------------ FOR ORANGE NETWORK 

N9S-WQ500T-D1-M-Orange-V007-SKU4-20161025 

DOWNLOAD ROM   

N9S-WQ500T-D1-M-Orange-V004-SKU4-20160914 

DOWNLOAD ROM   

N9S-WQ500T-D1-M-Orange-V004-SKU4-20160906 

DOWNLOAD ROM 

How to flash this device using SP Flash Tool 

Stage 1. Download, MTK VCOM USB drivers. 

Stage 2. Download, latest SP Flash Tool. 

Stage 3. Launch Flashtool inside the extracted folder. 

Stage 4. Click on scatter loader button. 

Stage 5. Select the scatter file inside the stock rom folder of the device you want to flash. 

Stage 6. Select either Download only, Firmware Upgrade or Format + Download from drop-down menu. 

Stage 7. Click Download Button. 

Stage 8. Now turn off and connect your device to PC. 

Stage 9. Wait for the flashing process to complete. 

Stage 10. Reboot device. 

If there was no cache or userdata inside the ROM folder 

In this stage, you might need to factory reset device from recovery after flash 

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages.... 

You can also use other tools like 

WiseLink 

SP Multiport Download 

Miracle Box 

Volcano 

Infinity CMII etc. 

If you encounter any error while flashing your device, click here and see if it solves your problem.