DOWNLOAD TECNO PHANTOM 8 & 8S STOCK ROM / FIRMWARE

Tecno Phantom 8 Details 

Tecno  Phantom 8 Plus runs on Android 7.0 Nougat. This device is a 5.7-inch ips touchscreen display with a resolution of 1080 X 1920 pixels, 370ppi. A size of 160.35 x 83.46 x 7.70 mm and weighs about 155g. 

Powered by 2.6GHz octacore processor MediaTek Helio P25 with Mali-T800MP2 and 6GB of RAM. There’s also 64GB of internal storage which can be expanded up to 256GB with microSD.  

There is a 12MP + 13MP dual primary camera with LED Flash and a 20-megapixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM + WCDMA+ LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope. 

This device is powered with a 3500Mah non-removable battery  

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility on whatever may happen to your device. 

Flash at your own risk. 

Make sure you are downloading the exact ROM of the device you want to flash because  

 flashing a wrong preloader, will make the device completely dead  

(can't power on, can't charge and will not be detected by a computer) 

 DOWNLOAD TECNO PHANTOM 8 STOCK ROM AX8S-H571B-N-170816V54 

 DOWNLOAD ROM  =================================================  DOWNLOAD TECNO PHANTOM 8S KENYA SAFARI NETWORK STOCK ROM AX8S-H571B-N-KESF-170922V72 

 DOWNLOAD ROM  

How to flash this device using SP Flash Tool 

Stage 1. Download, MTK VCOM USB drivers. 

Stage 2. Download, latest SP Flash Tool. 

Stage 3. Launch Flashtool inside the extracted folder. 

Stage 4. Click on scatter loader button. 

Stage 5. Select the scatter file inside the stock rom folder of the device you want to flash. 

Stage 6. Select either Download only, Firmware Upgrade or Format + Download from drop-down menu. 

Stage 7. Click Download Button. 

Stage 8. Now turn off and connect your device to PC. 

Stage 9. Wait for the flashing process to complete. 

Stage 10. Reboot device. 

If there was no cache or userdata inside the ROM folder 

In this stage, you might need to factory reset device from recovery after flash 

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages.... 

You can also use other tools like 

WiseLink 

SP Multiport Download 

Miracle Box 

Volcano 

Infinity CMII etc. 

If you encounter any error while flashing your device, click here and see if it solves your problem.