DOWNLOAD DOOGEE X5 PRO STOCK ROM / FIRMWARE

DOOGEE X5 Pro Details 

Doogee X5 Pro runs on Android 5.1 Lollipop. This device is a 4.5-inch ips touchscreen display with a resolution of 720 x 1280 pixels 234ppi. A size of 143 x 72.2 x 8.8 mm and weighs about 261g. 

Powered by 1.3GHz quad-core processor MediaTek MT6737 with 2GB of RAM. There’s also 16GB of internal storage which can be expanded with up to 64GB with microSD.  

There is a 8MP primary camera with LED Flash and a 2-mega pixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Support GSM+WCDMA+LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope. 

This device is powered with a 2400Mah non-removable battery

 Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility for whatever may happen to your device. 

Flash at your own risk. 

Make sure you are downloading the exact ROM of the device you want to flash because  

 flashing a wrong preloader will make the device completely dead  

(can't power on, can't charge and will not be detected by a computer)

DOWNLOAD DOOGEE X5 PRO STOCK ROM DOOGEE-X5Pro-Android6.0-16-11-23 t93bm-dg-a37-33pgu-hd-128g16g-fdd137820-T93_mba2_bom68-M_R16 

 DOWNLOAD ROM 

How to flash this device using SP Flash Tool 

Stage 1. Download, MTK VCOM USB drivers. 

Stage 2. Download, latest SP Flash Tool. 

Stage 3. Launch Flashtool inside the extracted folder. 

Stage 4. Click on scatter loader button. 

Stage 5. Select the scatter file inside the stock rom folder of the device you want to flash. 

Stage 6. Select either Download only, Firmware Upgrade or Format + Download from drop-down menu. 

Stage 7. Click Download Button. 

Stage 8. Now turn off and connect your device to PC. 

Stage 9. Wait for the flashing process to complete. 

Stage 10. Reboot device. 

If there was no cache or userdata inside the ROM folder 

In this stage, you might need to factory reset device from recovery after flash 

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages.... 

You can also use other tools like 

WiseLink 

SP Multiport Download 

Miracle Box 

Volcano 

Infinity CMII etc. 

If you encounter any error while flashing your device, click here and see if it solves your problem.