DOWNLOAD TECNO CAMON I AIR IN3 STOCK ROM / FIRMWARE

Tecno IN3 Details 

Tecno  IN3  runs on Android 7.0 Nougat themed with HiOS. This device is a 5.6-inch IPS touchscreen display with a resolution of 720 X 1440 pixels, 285ppi. A size of 151 x 72.6 x 7.5 mm and weighs about 212g. 

Powered by 1.3GHz quad-core MediaTek MT6737 processor with Mali-T720MP2 and 2GB of RAM. There’s also 16GB of internal storage which can be expanded up to 128GB with microSD.  

There is a 13MP primary camera with LED Flash and an 8-megapixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Supports GSM, WCDMA, and 4G LTE networks. Sensors on this phone include a fingerprint scanner, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope. 

This device is powered with a 3050Mah non-removable battery 

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility for whatever may happen to your device. 

Flash at your own risk. 

Make sure you are downloading the exact ROM of the device you want to flash because  

 flashing a wrong preloader will make the device completely dead  

(can't power on, can't charge and will not be detected by a computer) 

DOWNLOAD TECNO IN3 STOCK ROM 

IN3-H3721D-N-IN-180131V88 

DOWNLOAD ROM 

How to flash this device using SP Flash Tool 

Stage 1. Download, MTK VCOM USB drivers. 

Stage 2. Download, latest SP Flash Tool. 

Stage 3. Launch Flashtool inside the extracted folder. 

Stage 4. Click on scatter loader button. 

Stage 5. Select the scatter file inside the stock rom folder of the device you want to flash. 

Stage 6. Select either Download only, Firmware Upgrade or Format + Download from the drop-down menu. 

Stage 7. Click Download Button. 

Stage 8. Now turn off and connect your device to PC. 

Stage 9. Wait for the flashing process to complete. 

Stage 10. Reboot device. 

If there was no cache or userdata inside the ROM folder 

In this stage, you might need to factory reset device from recovery after flash 

If you don't understand those stages I explained to you-you can click here to follow our video or image of all those stages... 

You can also use other tools like 

WiseLink 

SP Multiport Download 

Miracle Box 

Volcano 

Infinity CMII etc. 

If you encounter any error while flashing your device, click here and see if it solves your problem.