DOWNLOAD GIONEE P2S STOCK ROM/FIRMWARE

 

  

Gionee P2s Details 

This phone comes with a 4.0-inch touchscreen display with a resolution of 480 x 800 pixels and dimension of 124.0 x 64.0 x 9.3 mm. It weighs about 124g. 

Powered by 1.3GHz dual-core Cortex A7 MediaTek MT6572 processor and 512MB of RAM there’s also 8GB of internal storage which can be expanded up to 32GB with microSD. Gionee P2s runs on Android 4.2 Jelly Bean OS. 

There is a 5-megapixel primary camera and a 0.3-megapixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth. Supports 2G, 3G networks. Sensors on this phone include Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope. 

This device is powered by a 160Mah non-removable battery. 

 Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility on whatever may happen to your device. 

Flash at your own risk. 

Make sure you are downloading the exact ROM of the device you want to flash because  

 flashing a wrong preloader, will make the device completely dead  

(can't power on, can't charge and will not be detected by a computer) 

DOWNLOAD GIONEE P2S STOCK ROM/FIRMWARE 

Gionee_P2S_0201_5552 

Download Rom 

Gionee_P2S_0201_5459 

Download Rom 

If you have a dead Gionee P2S after flashing any of the firmware above, download and flash the file below. Use WiseLinkTool for smooth process 

 Gionee P2S Dead Phone Fix 

Download Rom 

 If you don't want to use any of the files above, you can still fix dead/bricked Gionee P2S using Walton Primo F4 Stock ROM/firmware. 

 How to flash this device using SP Flash Tool 

Stage 1. Download, MTK VCOM USB drivers. 

Stage 2. Download, latest SP Flash Tool. 

Stage 3. Launch Flashtool inside the extracted folder. 

Stage 4. Click on scatter loader button. 

Stage 5. Select the scatter file inside the stock rom folder of the device you want to flash. 

Stage 6. Select either Download only, Firmware Upgrade or Format + Download from drop-down menu. 

Stage 7. Click Download Button. 

Stage 8. Now turn off and connect your device to PC. 

Stage 9. Wait for the flashing process to complete. 

Stage 10. Reboot device. 

If there was no cache or userdata inside the ROM folder 

In this stage, you might need to factory reset device from recovery after flash 

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages.... 

You can also use other tools like  

WiseLink 

SP Multiport Download 

Miracle Box 

Volcano 

Infinity CMII etc. 

If you encounter any error while flashing your device, click here and see if it solves your problem.