DOWNLOAD GIONEE P7 MAX STOCK ROM/FIRMWARE

 

Gionee P7 Max Details 

This phone comes with a 5.50-inch touchscreen display with a resolution of 720 X 1080 pixels with ~401ppi. A size of 154.0 x 76.8 x 8.8 mm and weighs about 161g. 

Powered by 2.2GHz octa-core MediaTek MT6595 processor and 3GB of RAM there’s also 32GB of internal storage which can be expanded up to 128GB with microSD.  

Gionee S6s runs on Android 6.0 Marshmallow. 

There is a 13-megapixel primary camera with LED Flash and a 5-megapixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth and USB OTG. Supports 2G, 3G and 4G (only band 40) networks. Sensors on this phone include Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope. 

This device is powered by a 3100Mah non-removable battery 

 Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility on whatever may happen to your device. 

Flash at your own risk. 

Make sure you are downloading the exact ROM of the device you want to flash because  

 flashing a wrong preloader, will make the device completely dead  

(can't power on, can't charge and will not be detected by a computer) 

DOWNLOAD GIONEE P7 MAX STOCK ROM 

Gionee_P7_Max_0201_T5371 

DOWNLOAD ROM 

Gionee_P7_Max_0201_T5357 

DOWNLOAD ROM 

Gionee_P7_Max_0201_T5254 

DOWNLOAD ROM 

 How to flash this device using SP Flash Tool 

Stage 1. Download, MTK VCOM USB drivers. 

Stage 2. Download, latest SP Flash Tool. 

Stage 3. Launch Flashtool inside the extracted folder. 

Stage 4. Click on scatter loader button. 

Stage 5. Select the scatter file inside the stock rom folder of the device you want to flash. 

Stage 6. Select either Download only, Firmware Upgrade or Format + Download from drop-down menu. 

Stage 7. Click Download Button. 

Stage 8. Now turn off and connect your device to PC. 

Stage 9. Wait for the flashing process to complete. 

Stage 10. Reboot device. 

If there was no cache or userdata inside the ROM folder 

In this stage, you might need to factory reset device from recovery after flash 

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages.... 

You can also use other tools like  

WiseLink 

SP Multiport Download 

Miracle Box 

Volcano 

Infinity CMII etc. 

If you encounter any error while flashing your device, click here and see if it solves your problem.