iTEl 1409 Stock ROM: Fix Calibration Not Touch After Flashing

iTEL 1409 Details 

iTEL 1409 Details 

Dimension – 125 x 64.5 x 10.8 mm4.0 – inch Touchscreen, 480 x 800 pixelsWeight – 194g 

1.0 GHz dual-core Processor 

Mali 400-MP2 GPU 

up to 32GB microSD 

2MP Rear Camera, LED Flash, Auto Focus0.3MP Front Camera 

Dual SIMEDGE , GPRS – 850 / 900 / 1800 / 1900MH 

WCDMA 900/2100WIFI 802.11 b/g/nbluetooth 4.0 

15600mAh Battery 

512MB RAM8GB Internal Memory. 

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility for whatever may happen to your device. 

Flash at your own risk! 

Make sure you are downloading the exact ROM of the device you want to flash because flashing

a wrong firmware can render the device useless  

(can't power on, can't charge and will not be detected by a computer). 

 iTEL-iT1409-C219F-IN-20160908 

Download rom

How to flash this device using Research Download or UpgradeDownload Tool 
stage 1. Download and install SPD drivers. 

Stage 2. Download the latest version of Research Download or UpgradeDownload. 

Stage 3. Extract and Launch Research Download/UpgradeDownload Tool. 

Stage 4. Click on load icon. 

Stage 5. Navigate to the folder containing the firmware. 

Stage 6. Select the pac file in the firmware folder. 

Stage 7. Wait for it to load in Research Download/UpgradeDownload tool. 

Stage 8. Click Play/Start button. 

Stage 9. Now connect the device to PC while holding volume down key 

(Some new devices required holding volume up key). 

Stage 10. Wait for the flashing process to complete. 

Stage 11. When you see Passed! Then note that the flashing or upgrading process is complete.
Stage 10. Reboot device. 

For a more details tutorial  

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages... 

You can also use tools like  

Miracle Box 

infinity CMII  

Volcano 

GPG Dragon etc.