DOWNLOAD iTEL S42 STOCK ROM / FIRMWARE

iTel S42 Details 

 iTel S42 runs on Android 8.1 Oreo. 

This device is a 5.6-inch ips touchscreen display with a resolution of 720 X 1440 pixels 282ppi. A size of 153.3 x 73.5 x 8.2 mm and weighs about 150g.  

Powered by 1.4GHz octa-core Qualcomm processor Snapdragon 425 with Adreno 305 GPU and 3GB of RAM. There’s also 32GB of internal storage which can be expanded up to 128GB with microSD.  

There is a 13MP primary camera with LED Flash and a 13-mega pixel front selfie camera. 

This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Support GSM + WCDMA + 4G LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope. 

This device is powered with a 4000Mah non-removable battery 

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility for whatever may happen to your device. 

Flash at your own risk. 

Make sure you are downloading the exact ROM of the device you want to flash because  

 flashing a wrong preloader will make the device completely dead  

(can't power on, can't charge and will not be detected by a computer) 

DOWNLOAD iTEL S42 STOCK ROM 

S42-QL1667-8.0-OP-V029-20180821

DOWNLOAD ROM 

How to flash this device using Research Download or UpgradeDownload Tool. 

stage 1. Download and install SPD drivers. 

Stage 2. Download the latest version of Research Download or upgrade download. 

Stage 3. Extract and Launch Research Download/UpgradeDownload Tool. 

Stage 4. Click on the load icon. 

Stage 5. Navigate to the folder containing the firmware. 

Stage 6. Select the pac file in the firmware folder. 

Stage 7. Wait for it to load in Research Download/UpgradeDownload tool. 

Stage 8. Click Play/Start button. 

Stage 9. Now connect the device to PC while holding volume down key 

(Some new devices required holding volume up key). 

Stage 10. Wait for the flashing process to complete. 

Stage 11. When you see Passed! Then note that the flashing or upgrading process is complete. 

Stage 10. Reboot device. 

For a more details tutorial  

If you don't understand with those stages I explained to you-you can click here to follow our video or image of all those stages... 

You can also use tools like  

Miracle Box 

infinity CMII  

Volcano 

GPG Dragon etc.