DOWNLOAD LYF WIND 1 LS-5010 STOCK ROM / FIRMWARE

 

LYF WIND 1 LS-5010 Details 

Lyf Wind 1 runs on a 1.1 GHz quad-core Qualcomm Snapdragon 410  SoC. 1GB RAM and 16GB internal Storage can be expanded with 64GB TF Card. 8MP rear camera and 5MP front selfie camera. Preloaded with Android 5.1 Lollipop. Standard connectivity present are Wifi, Bluetooth and gps available. Dual SIM standby (2G/3G/4G network). 4000mAh Battery. 

Note 

Follow the instructions on how to flash the device carefully below 

I will not take responsibility for whatever may happen to your device. 

Flash at your own risk! 

Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong firmware can render the device useless  

(can't power on, can't charge and will not be detected by a computer). 

LYF WIND 1 LS-5010 STOCK ROM 

Lyf_Wind_1_LS_5010_16GB_v010515 

DOWNLOAD ROM 

How to flash this device using Qualcomm Flash Image Loader (QFIL) 

Stage 1. Download and install the latest version of QPST from here 

Stage 2. Download and install Qualcomm usb drivers from here 

Stage 3. To launch QFIL, navigate to C:\Program Files\Qualcomm\QPST\bin) 

Stage 4. Now connect your infinix hot 3 X553 to PC while holding both vol up & down button 

Stage 5. Device will be detected and you will see  

Stage 6. Qualcomm HS-USB QDLoader 9008 (COM XX) 

Stage 7. Click Browse button under Select Build section 

Stage 8. Navigate and select the folder of the firmware 

Stage 9. Click on XML button from the pop up, select rawprogram xml file and then patch xml file 

Stage 10. Click Browse button under Select programmer section from dialogue box select the prog_emmc_firehose mbn file and click OK 

Stage 11. Click Download button and wait for flash process to complete 

For a more detail tutorial 

On how to flash this device with QFIL, click here 

You can also use tool like 

QcomDLoader to flash this phone.